How To Test Your Alternator By Disconnecting The Battery
Posted on by
How To Test Your Alternator By Disconnecting The Battery. Generally, it is better to avoid this method completely and stick to the safer method of using a. Use a multimeter and set it to read amperes.
The former method is not a great tactic and may ultimately damage the alternator even if it’s okay. Alternator, you are ready to start some diagnostic steps. A car’s alternator is a very important part of the car.
The Former Method Is Not A Great Tactic And May Ultimately Damage The Alternator Even If It’s Okay.
Place the black test lead on the negative battery post. You'll be using the vehicle's dome light to diagnose the charging system. If there is no battery in the circuit to act as a buffer, it simply means the alternator will produce up to 150 volts, which depends on your engine amps.
Observe If The Car Engine Is Running Like Earlier.
If your battery is dead or continues to die even after your drive then this is a sign your alternator is not working properly. Use a multimeter and set it to read amperes. If you see higher readings, chances are the alternator is good.
If The Vehicle Won’t Start, It’s Likely That The Alternator Has Failed.
Hence, it would help if you always used a voltmeter to test the alternator. Wear protective gloves as you need to be in close contact to the car battery to check the ampere output from your alternator. Open the car's hood and secure it.
Please You Shouldn’t Disconnect The Negative Battery Cable Just To Test An Alternator.
Also, your alternator can put out enough power to keep your car running when you disconnect your battery, even if it is not doing well. This will have no effect on your engine if the alternator is in good working order. To test the alternator of your vehicle, in this process, you have to disconnect the battery.
In This Video I Show How You Can Perform An In Depth Testing Procedure To Determine The Health Of Your Alternator And Charging System Using A Basic Multimete.
Park in an open, safe area. If the reading is lower than 12 volts, check the alternator to determine if it is not fully charging the battery. How to test alternator by disconnecting battery: