How To Change Code On Schlage Lock Fe575. Schlage lock not working after battery change: Rotate the lever to 1.
See enable or disable lock & leave on page 12. Thumbturn in locked position thumbturn in unlocked position; To reset a schlage electronic be365 or be575/595 lock:
Then Press The  Key When The Orange Light Appears.
Find user code a on the keypad locks programming guide. To recap, if your schlage fe595 programming code isn’t working, you can resolve the issue by performing a factory reset on the lock and then use the default programming code to reprogram it. See the schlage touch™ user guide for additional information.
Press The Schlage Button And The Number 1 Button Simultaneously.
To do this on schlage locks, you will have to press the “schlage” button while also pushing the number one on the pad at the same time. You can see this once you remove either the battery cover or the back of the lock. Enter a user code into the keypad.
See Enable Or Disable Lock & Leave On Page 12.
To reset a schlage electronic be365 or be575/595 lock: Enter user code a (four digits) into the keypad. Top 10 best schlage combination lock reset on the market.
How To Add A User Code On A Schlage Keypad Lock?
Schlage lock not working after battery change: You should see the “schlage” button flash and usually beep as well three times in a row. Just like any other system, it needs to be told that it is about to receive the new key code.
Enter The Programming And Wait For The Schlage Button To Illuminate Orange Three Times, And The Lock Beeps Three Times.
To set to unlocked (fe595 only) 1. Enter a new programming code (6 digits) and wait for the schlage button to illuminate orange three times, followed by three beeps. The schlage button will illuminate green, followed by one long beep, showing the programming code has been successfully changed.