Hardwood Floor Stripping Without Sanding. To make the process easier, clean the whole floor. So, for stripping the hardwood without sanding, i used my trusty citristrip (not sponsored), just like i did on the stairs.
Buffing or abrading the existing coat before refinishing, or, alternatively, applying a chemical “etching” kit. If any repairs are needed, resolve the issues. The process sounds easy, and it is.
You May Opt To Skip Sanding When Refinishing At Times.
Remember, for stripping hardwood floors without sanding, cleaning the floor is. Some pros refer to this as sandless refinishing, but that can also refer to a different method that substitutes a chemical etcher for the. If you have done this please let me know how you got on, or if you have any questions, please leave them in the comments section below.
Written By Eric Arneson On July 26, 2011 — 3 Comments.
The best way to lighten dark hardwood floors without sanding is to strip, stain, and coat them. Restoring hardwood floor to its original shine may require refinishing and sanding before staining with polyurethane. There are two basic methods:
Refinish Hardwood Floors Without Sanding?
This involves scuffing up the finish with a floor buffer and applying a refresher coat of finish. Buffing or abrading the existing coat before refinishing, or, alternatively, applying a chemical “etching” kit. (you can rent a buffing machine for half or full day.) then you apply a topcoat of finish.
If Any Repairs Are Needed, Resolve The Issues.
Once there are no loose particles or dirt anymore, use a wet cloth to wipe the floor and then let it dry. Explain how to lighten dark hardwood floors without sanding. The best way to refinish wood floors without sanding is to use a technique called screen and recoat.
Sweep And Vacuum Up All The Dirt And Make Sure Loose Pieces Of Resin Are Peeled Off.
Our method for stripping and buffing hardwood floors to refinish them. If your hardwood floor is only lightly worn, damaged, or scratched, you may be able to refinish it without sanding. Vacuum after each sanding to pick up coarse grit left on the floor.